These days, pretty much all new computers are equipped with SSD drives in place of HDD drives. You will find superlatives on them all around the specialized press – that they are quicker and function far better and that they are actually the future of home pc and laptop manufacturing.
On the other hand, how do SSDs fare within the web hosting world? Could they be responsible enough to substitute the successful HDDs? At Arrowhead IT Solutions, we’ll assist you better comprehend the differences between an SSD and an HDD and choose which one is best suited for you needs.
1. Access Time
With the introduction of SSD drives, file access rates have gone tremendous. Due to the brand new electronic interfaces utilised in SSD drives, the typical data file access time has been reduced to a record low of 0.1millisecond.
The technology behind HDD drives times back to 1954. And although it’s been drastically enhanced throughout the years, it’s nonetheless no match for the revolutionary ideas powering SSD drives. Using today’s HDD drives, the highest data file access rate you can attain can vary between 5 and 8 milliseconds.
2. Random I/O Performance
As a result of the brand–new significant data file storage solution incorporated by SSDs, they offer swifter data access rates and better random I/O performance.
Throughout Arrowhead IT Solutions’s trials, all SSDs demonstrated their capability to deal with at the least 6000 IO’s per second.
Throughout the very same tests, the HDD drives demonstrated to be much slower, with only 400 IO operations handled per second. Although this looks like a significant number, when you have a busy web server that contains numerous well known web sites, a slow hard disk could lead to slow–loading web sites.
SSD drives don’t have just about any rotating parts, meaning there’s a lesser amount of machinery within them. And the less literally moving components you will find, the lower the probability of failing will be.
The normal rate of failure of any SSD drive is 0.5%.
For an HDD drive to operate, it must spin a pair of metallic disks at more than 7200 rpm, keeping them magnetically stabilized in the air. They have a wide range of moving parts, motors, magnets as well as other gadgets crammed in a tiny place. Therefore it’s no surprise that the standard rate of failure associated with an HDD drive can vary between 2% and 5%.
4. Energy Conservation
SSDs don’t have any moving components and need very little cooling down power. Additionally they involve a small amount of power to operate – tests have revealed they can be powered by a regular AA battery.
As a whole, SSDs take in somewhere between 2 and 5 watts.
HDD drives are renowned for being loud. They demand far more electrical power for air conditioning purposes. Within a web server that has a lot of different HDDs running at all times, you’ll need a great deal of fans to keep them cooler – this will make them much less energy–economical than SSD drives.
HDDs take in between 6 and 15 watts.
5. CPU Power
SSD drives provide for speedier data file access speeds, which, in return, permit the processor to complete data queries much faster and then to return to other tasks.
The typical I/O hold out for SSD drives is actually 1%.
HDD drives allow for sluggish access speeds than SSDs do, which will result for the CPU having to hang around, while scheduling assets for your HDD to locate and give back the required data.
The typical I/O delay for HDD drives is approximately 7%.
6.Input/Output Request Times
In the real world, SSDs operate as admirably as they have during Arrowhead IT Solutions’s trials. We competed a full platform data backup using one of the production servers. All through the backup process, the normal service time for I/O queries was basically below 20 ms.
Using the same hosting server, however, this time equipped with HDDs, the end results were different. The average service time for an I/O request changed somewhere between 400 and 500 ms.
7. Backup Rates
You are able to feel the real–world added benefits of utilizing SSD drives every day. As an example, with a web server built with SSD drives, a full back–up will take just 6 hours.
Alternatively, on a web server with HDD drives, an identical back–up usually requires 3 to 4 times as long to finish. An entire backup of any HDD–powered web server usually takes 20 to 24 hours.
- Live Demo
- Arrowhead IT Solutions’s Virtual Private Servers come with no setup fees and work in a secure network offering 99.9% of uptime. Full root server access warranted.
Compare our prices
- Preview the tools and features coming with Arrowhead IT Solutions’s Virtual Private Servers. You can begin with a cheaper VPS server and move up with only a click as your needs increase.
- Compare our hosting plans
- It is easy to get in contact with us day and night by email or by making use of our really–fast ticketing platform. Arrowhead IT Solutions offers a 1–hour reply time warranty.